Electronics #
Everything you need to print to hold THE 100’s electronics. You can’t print the electronics themselves… yet.
Printed parts #
Purchased Parts #
| Item | Qty | Notes |
|---|
| m3 heat inserts | 2 | |
| m2.5x40 screw | 4 | |
| m2.5 nut | 12 | |
| m3x6 screw | 2 | |
| m3 nut | 2 | |
Details #
Cable Holder Frame #
Print #
| Quantity | | 1 |
|---|
| Filament Length | | 28m |
|---|
| Filament Weight | | 63.6g |
|---|
| Supports? | | No |
|---|
Purchase #
| Item | Qty | Note |
|---|
| m3 heat inserts | 2 | |
Cable Holder Top #
Print #
| Quantity | | 1 |
|---|
| Filament Length | | 5.9m |
|---|
| Filament Weight | | 17.7g |
|---|
| Supports? | | No |
|---|
Purchase #
Mainboard Holder #
Print #
| Quantity | | 1 |
|---|
| Filament Length | | 11m |
|---|
| Filament Weight | | 32.8g |
|---|
| Supports? | | Yes - only in countersunk holes touching the buildplate |
|---|
Purchase #
| Item | Qty | Note |
|---|
| m2.5x40 screw | 4 | Optional. Just my custom solution for stacking. |
| m2.5 nut | 12 | Optional. Just my custom solution for stacking. |
| m3 nuts | 2 | |
