Bottom Frame

  • Printed parts
    19

  • Purchased hardware
    110

  • Filament
    296.9m / 885.9g

  • Print time
    44h 34m

Printed Parts

Part NameLinkQtyNotes
Frame Back Leftgithub / printables1More info
Frame Back Rightgithub / printables1More info
Frame Front Leftgithub / printables1More info
Frame Front Rightgithub / printables1More info
Frame Connector Backgithub / printables1More info
Frame Connector Front 2github / printables1More info
Frame Connector Front 1github / printables1More info
Frame Connector Left 1github / printables1More info
Frame Connector Left 2github / printables1More info
Frame Connector Right 1github / printables1More info
Frame Connector Right 2github / printables1More info
Footgithub / printables4More info
5mm - 8mm Couplerprintables2More info
Connector Z-Rodgithub / printables2More info
Power Cord Clampgithub / printables1More info
Cable Guide Clampgithub / printables2More info

Purchased Parts

ItemQtyNotes
m3 heat insert42
m3 nut15
m3 washer8
m3x12 screw10
m3x16 screw18
m3x25 screw11
m3x35 screw6
m3x40 screw8

Details

Frame Back Left

Print
Quantity1
Filament Length41m
Filament Weight122.2g
Supports?No
NotesA brim is recommended to prevent warping.
Purchase
ItemQtyNote
m3 heat insert12
m3x35 screw2For holding the PSU

Frame Back Right

Quantity1
Filament Length40.9m
Filament Weight121.9g
Supports?No
NotesA brim is recommended to prevent warping.
Purchase
ItemQtyNote
m3 heat insert14
m3x35 screw1For holding the PSU

Frame Front Left

Quantity1
Filament Length51.1m
Filament Weight152.5g
Supports?Yes
NotesA brim is recommended to prevent warping.
Purchase
ItemQtyNote
m3 heat insert4
m3x40 screw4For holding the motor

Frame Front Right

Quantity1
Filament Length51.8m
Filament Weight154.6g
Supports?Yes
NotesA brim is recommended to prevent warping.
Purchase
ItemQtyNote
m3 heat insert4
m3x40 screw4For holding the motor
m3x35 screw2For holding the mainboard tray

Frame Connector Back

Quantity1
Filament Length5.5m
Filament Weight16.5g
Supports?No
Hardware
ItemQtyNote
m3x12 screw8

Frame Connector Front 2

Quantity1
Filament Length4.2m
Filament Weight12.4g
Supports?No
NotesUses inset nuts rather than heat inserts
Hardware
ItemQtyNote
m3 nut4

Frame Connector Front 1

Quantity1
Filament Length4.1m
Filament Weight12.3g
Supports?No
Hardware
ItemQtyNote
m3x25 screw4m3x30 also works but will stick out slightly

Frame Connector Left 1

Quantity1
Filament Length3m
Filament Weight8.9g
Supports?No
NotesUses inset nuts rather than heat inserts
Hardware
ItemQtyNote
m3 nut3

Frame Connector Left 2

Quantity1
Filament Length2.9m
Filament Weight8.8g
Supports?No
Hardware
ItemQtyNote
m3x25 screw3
m3x35 screw1Oval hole for PSU

Frame Connector Right 1

Quantity1
Filament Length2.9m
Filament Weight8.7g
Supports?No
NotesUses inset nuts rather than heat inserts
Hardware
ItemQtyNote
m3 nut4

Frame Connector Right 2

Quantity1
Filament Length2.9m
Filament Weight8.7g
Supports?No
Hardware
ItemQtyNote
m3x25 screw4m3x30 also works but will stick out slightly

Quantity4
Filament Length19.6m
Filament Weight58.4g
Supports?Yes - Using organic supports is smart here if your slicer supports them. It isn't necessary but will use 3g of material for supports instead of 11g.
NotesThe back right foot has a spot for 2 heat inserts for a clamp that holds the power supply cable. I personally printed that foot 4x and just don't put the heat inserts in the other 3 feet but you can choose to print just 1 with the holes and the other 3 without. The version without the extra mounting holes can be found here: github / printables.
Hardware
ItemQtyNote
m3 heat insert2For the back right foot only
m3x16 screw2Put a washer on it before attaching
m3 washer2

5mm - 8mm Coupler

Quantity2
Filament Length2.1m
Filament Weight6.4g
Supports?No
NotesThis is a necessary part if you didn't purchase them. These allow you to connect the screw rod to the motor. I printed mine in petg but that's mainly because it was already loaded in my printer. I think PLA is perfectly fine for this part.
Hardware
ItemQtyNote
m3 nut2
m3x12mm screw2

Connector Z-Rod

Quantity2
Filament Length2m
Filament Weight6g
Supports?Yes - only in the countersunk holes touching the buildplate
Hardware
ItemQtyNote
m3x16mm screw2

Power Cord Clamp

Quantity1
Filament Length0.74
Filament Weight2.22g
Supports?Yes - only in countersunk holes touching the buildplate
Purchase
ItemQtyNote
m3x16 screw2

Cable Guide Clamp

Quantity2
Filament Length0.62
Filament Weight1.85g
Supports?Yes - only in countersunk holes touching the buildplate
Purchase
ItemQtyNote
m3x16 screw2
← Gantry
Bed →