Bed

As mentioned in print settings, these parts should be printed with 30% infill.

Printed parts
3

Purchased parts
35

Filament
156m | 465g

Print time
21h 0m

Printed parts

Part Name	STL	Qty	Notes
Center	github / printables	1	More info
Left	github / printables	1	More info
Right	github / printables	1	More info

Purchased Parts

Item	Qty	Notes
m3x10 screw	8
m3x20 screw	12
m3 nut	12
LM8UU steel bearing	2
Bed spring kit	1	More than a singular item but is sold as a kit. 4 springs, 4 adjustment nuts. 4 screws. The kit I got was m4x40.

Details

Center

Print

Quantity		1
Filament Length		72m
Filament Weight		215g
Supports?		No
Note		A brim is recommended to help keep the bed from warping.

Purchase

Item	Qty	Note
m3 nut	12

Left

Print

Quantity		1
Filament Length		42m
Filament Weight		125g
Supports?		Yes
Note		A brim is recommended to help keep the bed from warping. Needs to be oriented at an angle to fit on a 225x225 bed like the Ender 3 (or be willing to override settings in your slicer to tell it to slice anyways).

Purchase

Item	Qty	Note
m3x10	4	For the lead screw nut
m3x20 screw	6

Right

Print

Quantity		1
Filament Length		42m
Filament Weight		125g
Supports?		Yes
Note		A brim is recommended to help keep the bed from warping. Needs to be oriented at an angle to fit on a 225x225 bed like the Ender 3 (or be willing to override settings in your slicer to tell it to slice anyways).

Purchase

Item	Qty	Note
m3x10	4	For the lead screw nut
m3x20 screw	6

Prev

Next