Back Frame
The back frame is one of the big changes from v1.0 to v1.1. It removes 2 rods from the back and solidifies the whole frame.
- Printed parts2
- Purchased parts24
- Filament80m | 238.6g
- Print time10h 56m
Printed parts
| Part Name | STL | Qty | Notes |
|---|---|---|---|
| Back Connector Left | github / printables | 1 | More info |
| Back Connector Right | github / printables | 1 | More info |
Purchased Parts
| Item | Qty | Notes |
|---|---|---|
| m3x10 screw | 24 |
Details
Back frame
| Quantity | 2 | |
|---|---|---|
| Print Time | 36m | |
| Filament Length | 40m | |
| Filament Weight | 119.3g | |
| Supports? | Yes - only in the countersunk holes touching the build plate. | |
| Note | There are 2 different STLs but in reality it's the same part twice. |
Purchase
| Item | Qty | Note |
|---|---|---|
| m3x10 screw | 12 |