Bottom Frame

v1.0

Parts List

These parts are required regardless of which hotend you’re using.

GitHubPrintablesQtyNotes
Bottom 1Bottom Frame Back Left1More info
Bottom 2Bottom Frame Back Right1More info
Bottom 3Bottom Frame Front Left1More info
Bottom 4Bottom Frame Front Right1More info
Connection BackBottom Frame Connector Back1More info
Connection Front 1Bottom Frame Connector Front 11More info
Connection Front 2Bottom Frame Connector Front 21More info
Connection LeftBottom Frame Connector Left 11More info
See infoBottom Frame Connector Left 21More info
Connection RightBottom Frame Connector Right 11More info
See infoBottom Frame Connector Right 21More info
FootBottom Foot Back Left4More info
n/a5mm - 8mm Coupler2More info

More Info

Back Left

Printing details
  • Qty: 1
  • Filament (length/weight): 37.4m / 111.5g
  • Supports: No

Notes

A brim is recommended to prevent warping.

Back Right

Printing details
  • Qty: 1
  • Filament (length/weight): 37.1m / 110.7g
  • Supports: No

Notes

A brim is recommended to prevent warping.

Front Left

Printing details
  • Qty: 1
  • Filament (length/weight): 50.9m / 151.9g
  • Supports: Yes - only needed for countersunk screw holes that are touching the build plate

Notes

A brim is recommended to prevent warping.

Front Right

Printing details
  • Qty: 1
  • Filament (length/weight): 51.5m / 153.8g
  • Supports: Yes - only needed for countersunk screw holes that are touching the build plate

Notes

A brim is recommended to prevent warping.

Connector Back

Printing details
  • Qty: 1
  • Filament (length/weight): 5.5m / 16.5g
  • Supports: No

Notes

None

Connector Front 1

Printing details
  • Qty: 1
  • Filament (length/weight): 4.1m / 12.4g
  • Supports: No

Notes

None

Connector Front 2

Printing details
  • Qty: 1
  • Filament (length/weight): 4.2m / 12.4g
  • Supports: No

Notes

None

Connector Left 1

Printing details
  • Qty: 1
  • Filament (length/weight): 3m / 8.8g
  • Supports: No

Notes

The github version only contains Connection Left with no matching part for the other side, meaning it has nothing to attach to. You need to also get Bottom Frame Connector Left 1 from Printables.

Connector Left 2

Printing details
  • Qty: 1
  • Filament (length/weight): 2.9m / 8.7g
  • Supports: No

Notes

The github version doesn’t have this part. You need to get it from Printables.

Connector Right 1

Printing details
  • Qty: 1
  • Filament (length/weight): 2.9m / 8.7g
  • Supports: No

Notes

The github version only contains Connection Right with no matching part for the other side, meaning it has nothing to attach to. You need to also get Bottom Frame Connector Right 1 from Printables.

Connector Right 2

Printing details
  • Qty: 1
  • Filament (length/weight): 2.9m / 8.7g
  • Supports: No

Notes

The github version doesn’t have this part. You need to get it from Printables.

Printing details
  • Qty: 4
  • Filament (length/weight): 10.5m / 31.4g
  • Supports: No

Notes

Printables contains separate 4 stls for the 4 separate feet but they’re all the same thing. Just print 1 of them 4 times.

5mm - 8mm Coupler

Printing details
  • Qty: 2
  • Filament (length/weight): 2.1m / 6.4g
  • Supports: No

Notes

This doesn’t exist on GitHub but is a necessary part if you didn’t purchase it. These allow you to connect the screw rod to the motor. I printed mine in petg but that’s mainly because it was already loaded in my printer. I think PLA is perfectly fine for this part.

← Top Frame
Bed →